After extensive research across the world we found Huntsman USA that were at the cutting edge of energy saving spray foam products. Together with their European manufacturing facility Pur Systems GMBH Germany they developed what is now the market leading E:Zero range of spray foam insulation.
Yes our E:Zero E500 is fully NSAI Agrément Certified and has had extensive testing done to ensure that it complies fully to Irish Building Regulations and has been tested and approved for use in Irish conditions.
All products are CE marked and can be applied in ANY country in EU and comply with the Harmonized European Standard EN: 14315-1 and European Construction Products Regulation 305/2011.
To comply with building regulations a 50mm air gap must be left between any insulation and felt, this is achieved by the installation of our unique ventilation card that is fitted between the rafters this allows the air from the soffit to be directed up and over the spray foam this ensures the timbers can breathe naturally.
CPI FOAM is a certified ventilation card is NOT CARDBOARD because when cardboard gets wet it will turn to mache and blocks eave ventilation.
E:Zero foam is spray applied on the job site. As it is sprayed if foams up between 50and 100 times in volume,providing a fully adhered, continuous,airtight insulation layer. Even the smallest cracks are perfectly sealed. Since it is sprayed, it fits all shapes and, corners and cavities perfectly.
The finished products contains no formaldehyde and does not release emissions to the atmosphere or destroy the ozone layer. Being completely inert E:Zero insulates for the lifetime of the building and saves approx 50% of the energy, 50% of the carbon emissions associated with the burning of the fossil fuels used to heat or cool homes. There are no VOC's,CFC's, HCFC's, or Urea Formaldehyde used in the manufacture of E:500 foam.
Normally on a retrofit job our trained contractors takes 1- 2 days depending on the complexity and access.
Yes that is no problem we can even have a site specific U value and condensation risk analysis done in our technical dept.
Daltotherm® TSW38 - 00 is a 2 - component closed cell spray polyurethane system with in-place core density of 36 kg/m³. It has been developed as a class 1 system according to BS476 Part 7 and can be usedin residential and commercial buildings.